Sawmill
We provide customized extraction solutions for sawing lines, ensuring reliable compliance with dust limit values and efficient dedusting of entire sawing lines, reducing maintenance, fire risk, and health hazards. With return air below 0.1 mg/nm³, systems guarantee a safe, clean, and optimized hall climate year-round.
Cross-laminated timber (CLT)
We have been a trusted partner in CLT production from the very beginning, supplying the first extraction systems to its inventor. Our robust, energy-efficient solutions ensure precise monitoring, reliable dust extraction, and optimized energy use. Designed for continuous operation, they deliver maximum reliability, safety, and near 100% availability for fault-free production around the clock.
Glue-laminated Timber
Glued-laminated timber (glulam/GLT) is made from finger-jointed slats that are glued and planed in layers for exceptional strength and dimensional stability. Produced from spruce, fir, pine, Douglas fir, or larch, its manufacturing requires speed and cleanliness due to extensive gluing. Our extraction systems ensure dust-free surfaces, consistent gluing quality, and lower post-processing costs.
Solid structural timber (SST)
Solid structural timber refers to planed and dried solid wood, typically produced from spruce, larch, fir, Douglas fir, or pine. With speed as a key production factor,
Scheuch LIGNO extraction systems deliver above-average availability even under high loads with large material volumes. This ensures reliable performance and a clear competitive advantage.
DUST FILTRATION
Process Filters
Scheuch’s innovative air pollution control (APC) technology has found its place in a variety of applications across the globe. Our global subsidiaries allow us to meet our client’s clean air requirements through every step of the manufacturing process. Product scope extends from baghouse dust collectors to exhaust gas cooling and waste heat utilization.
DUST FILTRATION
Nuisance Filters
Because of their large-volume valves and patented Impulse cleaning system, the Compact Impulse Filter model stands out with its low operating and maintenance costs. In addition, the compressed air cleaning system, the filter bag, or cage design ensures the highest levels of operating reliability.
DUST FILTRATION
Hot-Gas Filter
Scheuch’s Hot-Gas Filter is the future of exhaust gas cleaning and dust control. This model can really take the heat. One of the many advantages is the high-temperature resistance of the ceramic (candle) filter elements. While conventional bag filters with fabric media reach their limits at process temperatures of 500° F (260° C), for hot-gas filters and their ceramic filter elements, even 932° F (500° C) is not a problem.
EXHAUST GAS CLEANING
Dry Sorption
Scheuch specializes in providing customized solutions for each individual application to ensure the best combination of low investment costs and minimal operating expenses. Scheuch dry sorption technologies can be used to reduce acidic pollutants (HF, HCL, and SOx) by utilizing additives made of calcium or sodium.
HEAT EXCHANGERS and COOLING SYSTEMS
Waste Heat Utilization
Systems for utilizing waste heat with local and district heat enable the most efficient and profitable use of recovered energy. Scheuch developed the Energy Recovery & Cleaning System (ERCS) that maximizes waste heat utilization for boiler outputs of up to 200 MW using condensers and economizers.
HEAT EXCHANGERS and COOLING SYSTEMS
Gas Conditioning Tower
When performing exhaust gas cleaning, the exhaust gas needs to be cooled down prior to starting the cleaning process. Scheuch’s gas conditioning towers provide exceptional efficiency due to their optimal instrument-based design and layout combined with adapted controls.
FANS
Radial Fans
Scheuch has built more than 70,000 industrial-grade radial fans to transport clean or exhaust air, chips, and fibrous material as well as explosive gas mixtures. Over the years, we have created and perfected a comprehensive program of roughly 1,700 fan types. These have pressure ranges from 750 Pa (4 in WC) to 30,000 Pa (80 in WC) and volume flows from 750 to 960,000 Am³/h (300 to 380,000 acfm).
BULK MATERIAL HANDLING
Rotary Valves
Rotary valves are used to discharge dust, chipboard shavings, and fibrous conveyed goods. They can also be used as shut-off devices. Scheuch rotary valves can also be designed to be resistant to ignition and flame penetration for explosion decoupling purposes.
BULK MATERIAL HANDLING
Screw Conveyors
Tube and trough-type screw conveyors are used to continuously transport bulk materials at throughput volumes of 2 to 500 m³/h and with diameters between 8 and 40 inches (200 and 1,000 mm). Model types of screw conveyors include pipe, trough, and custom design.
BULK MATERIAL HANDLING
Pendulum Flaps
Pendulum flaps are used for the continuous dosing, blocking, and discharging of bulk materials. The flexible structure of the Scheuch pendulum flaps enables reliable channeling and separation of free-flowing bulk materials out of and into pressure-difference chambers (e.g., filter systems). These are actuated pneumatically, electrically, or mechanically.
